Audi A8 2019 - Parking Lock Emergency Release

29
1
2
3
4
Step 4 is used to restore shift function.
After lifting the handle, it will rotate
counter-clockwise 140 degrees to be
reset.
The parking lock emergency release is similar to the 2017
Q7. The actuating mechanism is located under a cover in
the driver's footwell.
Parking lock emergency release
When the parking lock emergency release device
is actuated, the yellow transmission warning
lamp and the drive position indicatorN light up
in the instrument cluster. The following warning
also appears: "Vehicle may roll away! P cannot be
selected. Please apply parking brake."
662_134
662_135
662_136
Cover
Actuating mechanism
Socket wrench
Locking the parking lock (P-ON position)
Pull the parking lock emergency release device slowly
upwards out of the actuating mechanism, position 4. If the
device is removed quickly, it could damage the release
mechanism.
› Fit the cover.
Emergency-releasing the parking lock (P-OFF position)
› Remove cover.
› Insert the socket wrench into the actuating mechanism,
position 1.
› Turn the socket wrench clockwise 140°, position 2, and
press down simultaneously, position 3.
Approximately 140°
Warning!
Before actuating the emergency release device of the
parking lock, the vehicle must be secured to prevent it from
rolling away.
If it is no longer necessary to emergency-release the
parking lock, the parking lock must be locked again (P-ON
position).
It is necessary to check the emergency release device after
assembly work on its component parts.