78
662_095
Process diagram of Audi pre sense rear
Presenseside (to be introduced at a later date)
› Raising of the vehicle ride-height in the event of an
imminent side-on impact on the collision-facing side. In
this way, the forces occurring during a collision can be
redirected toward crash-active body structures.
› Full tensioning of the electrically reversible seat belt
tensioners.
› Closing of the side windows apart from a residual gap.
› Closing the panoramic sunroof.
› The electrical upper backrests move into an upright
position.
› The electrical head restraints
2)
move into an elevated
position.
› Display of corrective action by Audi pre sense in the
instrument cluster.
Movement of the electri-
cal head restraints into
the upright position
Closing of the side
windows apart from a
residual gap
Closing the panoramic
sunroof
Visual advance warning
and/or indication of
corrective action
Movement of the upper
backrests into the upright
position
Inflation of the seat side
bolsters
Partial tensioning Full tensioning
Key:
Audipresenseside can initiate measures for the protection of the vehicle occupants in the event of a side-on collision
with another vehicle.
In models equipped with Audipresenseside, the following actions can be initiated:
To Next Page
