81
System characteristics of Audi pre sense 360
› Audipresenseside is active while traveling forward at
speeds of between approximately 0 - 37.2 mph
(0 - 60 km/h). It is also active at speeds of between approxi-
mately 0 - 12.4 mph (0 - 20 km/h) while backing up.
› To be detected from the side, the approaching vehicles
must be at or below a defined angle to your vehicle.
Pre sense front
Audipresensefront can, in the event of possible head-on
collisions, assist the driver by taking a variety of measures.
In models equipped with Audipresensefront, the follow-
ing action can be taken:
› Visual prewarning.
› Audible prewarning.
› Prefilling of the brake system.
› Reconfiguration of hydraulic brake assist.
› Acute warning by braking impulse.
› Automatic braking to emergency braking level.
› Target braking.
› The electrical head restraints move into an elevated
position.
› Inflation of the side bolsters in the seats and backrests.
› Closing the panoramic sunroof.
› Closing of the side windows apart from a residual gap.
› Partial tensioning of the electrically reversible seat belt
tensioners.
› Full tensioning of the electrically reversible seat belt
tensioners.
› Display of corrective action by Audi pre sense in the
instrument cluster.
› Driver take-over prompt.
Installation location
To implement Audipresensefront, the vehicle requires:
› Driver Assistance Systems Front Camera R242.
662_099
Driver Assistance Systems Front
Camera
R242
CAUTION:
To avoid the danger a vehicle being raised automatically while working on the vehicle, refer to the safety instructions for
deactivating the vehicle raise function in the Workshop Manual.
To Next Page
