Audi allroad 2016 - Bluetooth Pairing

Bluetooth® Pairing
Initial Setup
Bluetooth pairing is a one-time procedure. Once
paired, your phone will automatically connect
when you startyour vehicle. Your contact list
will synchronize, allowing you to access it via the
infotainment system. For information on phone
compatibility, visit audiusa.com/bluetooth.
1. Switch ignition to Accessories mode.
2. Enable Bluetooth in your phone's Settings and
set to pairing or search mode.
3. Choose the Audi selection from the Devices list
in your phone.
For MMI:
► Select YES with control knob.
► Confirm 6-digit PIN matches; select YES with
control knob.
► Select Pair on the phone.
For Concert Radio:
► Enter default PIN 1-2-3-4.
4. The phone is now paired and Contacts will
synchronize.
5. MMI will display synchronizing icon and
Bluetooth icon:
► Contacts synchronizing.
► Bluetooth active and network strength bars.
Learn more about
Bluetooth Pairing
TEXT ARPAIR16A
to 38981
Learn more about
Bluetooth Audi Concert Radio
TEXT ARPAIR16B
to 38981
Do not text and drive.
Message and data rates may apply.
Some phones may require a response to automatically
connect for future connections. Once paired, the Bluetooth
symbol appears on the MMI screen along with network
strength bars and it will be displayed whenever a paired
phone is connected to the infotainment system.
Wireless Audio Streaming
When your Bluetooth device is paired to your Audi
vehicle, it allows you to stream music wirelessly from
your device through the vehicle's stereo system.
(Refer to Bluetooth pairing instructions to pair a
device.) To ensure that the Bluetooth Audio is enabled
on the MMI system*:
1. Press the TEL function button.
2. Select the Settings control button and choose
Bluetooth from the menu.
3. Ensure that the Bluetooth Audio player is turned
on.
► Bluetooth Audio player will remain on until
selected off.
4. Next, select Bonded Bluetooth devices.
5. Choose your paired device and select it.
6. Select Audio player to connect.
7. Press the MEDIA function button.
Learn more about
Wireless Audio Streaming
TEXT ARMEDIA16
to 38981
Do not text and drive.
Message and data rates may apply.
Import Media 0 Source
C& Jukebox
SH SD card
| SS Empty
1 Q1 Not connected
\ 0 iPhone
\ 4 ?) Not connected
Functions
Settings
8. S elect the Source control button and select
device.
► Music tracks can be selected using the
PREVIOUS and NEXT arrow buttons.
► Pressing the volume dial will pause audio.
With Bluetooth Audio being turned on, the Bluetooth
audio player will automatically connect to your
device.
When an Apple device that is paired to the
BLuetooth system is connected to the Audi Music
Interface (AMI), a prompt appears to notify you
that the Bluetooth connection has been disabled
automatically. When disconnected from the AMI, it
will re-establish the Bluetooth connection.
•Wireless Audio available on MMI Navigation equipped vehicles.
Note:
See your phone's Owner's Manual for specific Bluetooth activation instructions. Vehicle must be stationary with the parking brake engaged while
performing this operation. Once paired, the Bluetooth symbol appears in the MMI screen along with network strength bars, and it will be displayed
whenever a paired phone is connected to the infotainment system.
Important Safety Instructions and Warnings: Bluetooth* Pairing
► Medical experts warn that cell phones can interfere with the function of pacemakers. Always maintain a minimum distance of 20 centimeters
between the cell phone antenna and the pacemaker.
► Do not carry the cell phone in a pocket directly over the pacemaker when the phone is switched on.
► Switch the cell phone off immediately if you suspect it may be interfering with the pacemaker.
► Do not use the Voice Recognition system in emergencies because your voice may change in stressful situations. It may take longer to dial the
number or the system may not be able to dial it at all. Dial the emergency number manually.
► Switch your cell phone off in areas where there is a risk of an explosion. These locations are not always clearly marked. This may include gas
stations, fuel and chemical storage facilities or transport vehicles, or locations where fuel vapors (such as propane or gasoline vapor in vehicles or
buildings), chemicals or large quantities of dust particles (such as flour, sawdust or metal) may be present in the air. This also applies to all other
locations where you would normally turn your vehicle engine off.
► The demands of traffic require your full attention.
► Obey all applicable laws regarding use of telephones in vehicles.
► Switch off the telephone where use of cell phones is prohibited. Obey all applicable notices and regulations.
BLuetooth®