cover positioning marks.
Install drive belt in this order: water pump, idler pulley, camshaft sprocket.
Tension drive belt.
Tightening Torques
*Install using locking adhesive
*Replace bolts
* 90 ° equals one quarter turn
SEALING FLANGES AND FLYWHEEL/DRIVE PLATE, REMOVING AND INSTALLING
Sealing flanges and flywheel/drive plate, removing and installing
Component Nm
Drive belt cover at the cylinder block 10 * See note
Lower drive belt cover at cylinder block 10 * See note
Center drive belt cover at cylinder block 10 * See note
Vibration damper/pulley at crankshaft 10 + 90 ° * See note
Ribbed belt tensioner at bracket 23
Drive belt tensioning pulley 27
NOTE:
Servicing work on clutch:
-->
30 CLUTCH for 5 SPD. MANUAL TRANSMISSION 012/01W FRONT
WHEEL DRIVE
30 CLUTCH for 5 SPD. MANUAL TRANSMISSION 01A ALL WHEEL
DRIVE
30 CLUTCH for 6 SPD. MANUAL TRANSMISSION 01E ALL WHEEL
DRIVE
30 CLUTCH for 6-SPEED MANUAL TRANSMISSION 01X, FRONT-
WHEEL DRIVE
30 CLUTCH for 6-SPEED MANUAL TRANSMISSION 02X, FOUR-
WHEEL DRIVE
30 CLUTCH for 6-SPEED MANUAL TRANSMISSION 0A3, ALL WHEEL
DRIVE
2005 Audi A4 Quattro
ENGINE 1.8 Liter 4-Cyl. 5V Turbo Engine Mechanical, Engine Code(s): AMB
1:00:58 AM Page 68
To Next Page
