11
Push rod tensioner
Design
637_098
637_100
5-piece exible push rod made of
plastic "Snake" (5)
Guide tube/pressure chamber (3)
Belt retractor shaft as torsion bar
spring (6)
Gear (7)
Guide (8)
Piston (2) with:
• seal
• stopper
• spacer
Plugged electrical connection (1) with:
• igniter
• pyrotechnic propellant charge
Braking wedge
(4)
Piston (2) and push rod "Snake" (5)
The guide tube/pressure chamber (3), accommodates the
following:
• Plugged electrical connection with igniter and pyrotech-
nic propellant charge (1).
• 5-piece exible push rod "Snake" (5) and "Snake" guide.
• Pressure chamber (3).
• Braking wedge (4).
• Piston (2) (including seal, stopper and spacer).
Piston (2) with:
• seal
• stopper
• spacer
4 short parts of the "Snake" Main part of the "Snake"
To Next Page
Loading...
