EasyManua.ls Logo

Audi Q5 80A 2017 User Manual

Audi Q5 80A 2017
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation instructions
Audi Q5 (80A) 2017 ►
Fixed/mechanically removable towing
bracket with E-set (NAR),
for package number 80A.092.1
15
Audi Genuine Accessories
Edition 01
Service
Service Department. Technical Information
Question and Answer IconNeed help?

Do you have a question about the Audi Q5 80A 2017 and is the answer not in the manual?

Audi Q5 80A 2017 Specifications

General IconGeneral
BrandAudi
ModelQ5 80A 2017
CategoryAutomobile
LanguageEnglish

Summary

General notes

Safety instructions for pyrotechnical, electrical and mechanical components of the restraint system

General safety instructions

General safety practices for handling and working with pyrotechnic components and restraint systems.

Safety notes on the towing bracket - Fitting and operation

Notes on the towing vehicle

Vehicle-specific information and requirements when fitting the towing bracket.

Notes on the towing bracket

Technical data, D-value, and permitted drawbar load for the towing bracket.

Overview of components

Overview of mechanical components

Identification and description of the mechanical parts of the towing bracket system.

Overview of electrical system components

Identification and description of the electrical system components for the towing bracket.

Additional required parts

Information on additional parts needed based on specific vehicle equipment.

Assembly overview and tightening torques

Towing bracket with cross member

Assembly steps and torque specifications for the towing bracket and cross member.

Luggage compartment electrical system

Installation details for the electrical system components within the luggage compartment.

Preparations

Required special tools, testing instruments, measuring instruments and auxiliary devices

List of specialized tools and equipment necessary for the installation process.

Disconnecting the battery

Procedure for safely disconnecting the vehicle battery before electrical work.

Removing the following equipment

Instructions for removing vehicle components to facilitate installation.

Installing the towing bracket

Fitting the towing bracket

Detailed steps for preparing and physically attaching the towing bracket.

Installing the towing bracket

Procedure for mounting the towing bracket onto the vehicle's frame.

Connector panel assembly

Instructions for assembling and connecting the trailer socket's connector panel.

Electrical connection

Fitting the socket with retrofit wiring harness to the connector panel

Connecting the trailer socket wiring harness to the main connector panel.

Installing the bracket for the trailer detector control unit -J345-

Mounting the bracket for the trailer detector control unit (J345).

Routing and connecting the socket retrofit wiring harness

Proper routing and connection of the socket retrofit wiring harness.

Connecting the supply line for the brake booster

Instructions for connecting the brake booster supply line, including variants.

Workflow for variant 1

Specific steps for connecting the brake booster supply line on Variant 1 vehicles.

Workflow for variant 2

Specific steps for connecting the brake booster supply line on Variant 2 vehicles.

Concluding operations

Reassembling the vehicle

Procedures for reassembling vehicle components after the installation.

Connecting the battery

Procedure for reconnecting the vehicle battery after installation.

Adapting the trailer detector control unit -J345- coding

Coding the trailer detector control unit (J345) using diagnostic tools.

Commissioning and functional check

Verifying the correct operation of the installed towing system.

Adjusting the cooling system

Guidance on cooling system adjustments required for towing operations.

Related product manuals