Audi q7 2017 - Pre sense Settings and Displays

32
Settings and displays
Displays in the instrument cluster
Setting and switching o the early warning
Two dierent instrument clusters are available for the Audi
Q7 depending on the model: there is the conventional
analog display and the optional Audi virtual cockpit.
The displays dier depending on equipment level. The
displays in the section of this eSelf-Study Program for Audi
pre-sense are from a system with an analog display on a
vehicle with ACC, MMI and MMI Navigation plus.
The early warning function of Audipresensecity and pre
sense front can be set and switched o in the MMI. The
following setting options are available:
• The settings for the "early" "medium" or "late" early
warning are active until another selection is made in the
MMI.
• If the early warning has been set to "o", the early
warning is switched on again after turning the ignition
back on. The "late" setting is activated by the system.
This system setting can change at a later date to the
extent that the system activates the value used before
the early warning was switched o.
o The audible and visual early warning is o.
early The audible and visual early warning is adjusted to early.
medium The audible and visual early warning is adjusted to medium.
late The audible and visual early warning is adjusted to late.
637_027
Early warning
o
early
medium
late
12:00
Switch o Audi pre sense
Driver assist Audi pre sense
Settings in the CAR menu