Audi q7 2017 - Page 37

33
Switching o Audi pre sense
Audipresense can be switched o in the MMI. Specic func-
tions of the overall system are deactivated. This means that
no individual functions of Audipresense can be deactivated:
The eect of switching o Audipresense on the individual
presensefunctions is explained in the relevant sections of
this eSelf-Study Program.
If the vehicle is equipped with presensebasic,
presenserear or presensefront, the 1st display will
appear in the instrument cluster when the driver switches
Audipresense o. If the vehicle is only equipped with
pre sense city, the 2nd display appears.
637_028
637_030 637_031
Early warning
medium
12:00
Switch o Audi pre sense
Driver assist Audi pre sense
Note
The driver information display in Fig. 637_031 is expected to change at a later point in time in the instrument cluster.
Audi pre sense:
currently restricted
Emergency braking system
switched o
Displays when function is deactivated
Display in the MMI
1st display
2nd display
If the vehicle is equipped with presensecity and a further
presensefunction, such as presensebasic, both displays
are shown one after the other. The messages are stored in
the tab for driver information and warning lamps and can
be retrieved.