EasyManua.ls Logo

Audi q7 2017 - Page 29

Audi q7 2017
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
637_106
Function B
System characteristics of the turn assist function
Turn assist is available only at speeds below 6.2 mph
(10 km/h).
The indicators must be activated.
In the case of left-hand-drive vehicles, the system only
works when turning right.
This is indicated audibly and visually.
Deactivating turn assist
If Audipresense is switched o in the MMI, turning assist
is not available. The system can be reactivated in the MMI.
If the system has been shut o via the MMI, it will auto-
matically be switched on the next time the ignition is
switched on.
1)
Not available in all countries.
637_041
Audi pre sense
The driver of vehicle (E) wants to turn right and indicates by
actuating the left indicator. Vehicle (E) is travelling slower
than 6.2 mph (10 km/h). Audi pre sense front continuously
monitors the trac ahead of the vehicle with the aid of ACC
and the front camera. As a result, Audipresensefront
knows that another vehicle (A) is approaching in the
oncoming direction.
Audipresensefront also knows that the driver is planning
to turn left (from the actuation of the indicator).
In this case, Audipresensefront would automatically
initiate emergency braking via J104 with the result that
vehicle (E) is brought to a halt in its own lane. The driver is
alerted visually and audibly to the fact that the vehicle is
braking automatically
1)
. If the vehicle has automatically
brought the vehicle to a halt without driver input, further
audible signals will sound. These signals alert the driver to
the fact that he must actively take control of the vehicle
(for example, by braking).
If Audipresense detects that a critical situation would
occur due to the current turning maneuver, hydraulic brake
assist is recongured by ABS Control Module J104. In
addition, the deployment algorithms for hydraulic brake
assist are adjusted. This action ensures the rapid response
of the brake during a braking maneuver. If the driver of
vehicle (E) were now to continue the turning maneuver and
move o, Audi pre sense front would detect this based on
the information provided by the speed sensors of ABS
Control Module J104.
Turning assist

Related product manuals