41
This driver information is displayed for about10seconds
after turning on the ignition because presensecity is
unavailable during this time. The reason is that the Driver
Assistance Systems Front Camera R242 is required for
about 10seconds until the camera is ready.
In the MMI, the driver can select whether the presense
early warning or presense actions are to be shown on the
head-up display.
If the "Driver assist" option is activated in the CAR Menu in
the MMI under "Head-up display"
1)
and "Display content",
presense early warnings and inputs will also be shown on
the head-up display.
637_076
637_113
1)
Optional equipment.
Head-up displays
Settings in the CAR menu
637_084
Trac signs
Navigation messages
Head-up display Display unit
Driver assist
Night vision assist warning symbol
100kph