Audi connect
®
cont.
13
Wi-Fi Configuration
6. Select a password that is at least eight characters long.
The default password can be used. Or a new password can
be entered.
4. Select Wi-Fi settings. 5. Then select Wi-Fi active
and choose Visible.
NOTE: Most devices use Encryption type WPA2 as the default.
14
9. Press the Back button,
scroll to Data connection
and select.
7. Select Apply settings to
save your password.
8. On your device, search for
Wi-Fi networks, select SSID
and enter your password to
establish a connection.
NOTE: You may connect up to eight wireless
devices at one time.
Always pay careful attention to the road, and do not drive while distracted. The features and technologies discussed are optional, may require an additional subscription with separate terms and conditions, and should be used only
when it is safe and appropriate. The Wi-Fi hotspot feature is intended for passenger use only.
Audi connect® services are only available where there is mobile network coverage. You can obtain more information from your current service provider.
10. Select Without request.
Press the back button to
exit.
Data Configuration
Important Safety Instructions and Warnings which you must read, are listed on the last panel under Audi connect®.
Audi connect®
To Next Page
Loading...
Need help?
General
