Windshield Wipers
25
Rain Sensing Wipers
To activate rain-sensing wipers:
1. From the “OFF” position, move the wiper stalk up one click.
2. The rain sensor will automatically turn the wipers on when it begins
to rain, adjusting wipe frequency with rainfall intensity.
3. The lever on the top of the stalk controls the sensitivity.
Move it left for less sensitivity and right for more sensitivity.
NOTE: Turn o the wipers before going through a car wash.
The headlight washer system only functions when the headlights are on.
The headlights and optional nightvision system camera are washed in intervals.
Wash
Pull the stalk toward you to spray washer fluid.
TEXT A8WIPERS to 38981
Do not text and drive. Message and data rates may apply.
Continuous Wipe
• “LOW”: From the “OFF” position, move the wiper stalk
up two clicks.
• “HIGH”: From the “OFF” position, move the wiper stalk
up three clicks.
Single/Quick Wipes
• Single/quick wipe: From the “OFF” position,
press the wiper stalk down once briefly.
NOTE: For faster wiping, press the wiper stalk down once and hold for two seconds.
Important Safety Instructions and Warnings which you must read, are listed on the last panel under Windshield Wipers.
26
Windshield
Wipers
To Next Page
Loading...
