Voice Recognition: MMI
®
Call By Name
TEXT A8VOICE1 to 38981
Do not text and drive. Message and data rates may apply.
9
1. Press the button.
A beep will sound.
2. Say, “Call” <Name from directory>
(e.g., “Call John Smith”).
3. To confirm the request, say “Yes”. The number
will be dialed.
NOTE: If multiple numbers are stored for a given contact, the system will ask
which number you wish to dial. When calling by name using voice recognition,
you must say the name as it is stored in your phone book.
10
Important Safety Instructions and Warnings which you must read, are listed on the last panel under Voice Recognition.
You may also speak natural language commands using the button.
Verbal destination commands can be given while in any screen.
Your Audi MMI® Navigation system has many Global Voice
Recognition commands available. This means that you can access
any function or while another function or mode is active.
Natural Language Commands
Commands such as:
• Enter Number • Redial
• Enter Destination • Online Destination
• Presets • FM, AM
• Media
You can begin your request from any screen.
Once your requested function is active, you can continue
with commands for that mode.
For example:
• Enter Number
• Dial
• Repeat
• Correction
To cancel Voice Recognition while active, say “Cancel” after
the beep or press the button until system responds
with cancelled.
Refer to your owner’s manual for further commands.
TEXT A8VOICE2 to 38981
Do not text and drive. Message and data rates may apply.
BLUETOOTH®
Pairing
To Next Page
Loading...
Need help?
General
