07
Power Source
This unit is designed to be operated on AC/DC.
AC Operation
Plug the smaller end of AC power cord into AC in socket (14)
located on the unit and then plug the end into the socket. Any
inserted batteries will be automatically disconnected.
DC Operation
On the base of the unit, open the BATTERY
COMPARTMENT DOOR. Install 8 x C Batteries (not
included) into compartment. Please follow correct polarities
as indicated.
CAUTION!
• Remove batteries if they are at or not being used for
a long period of time.
• Batteries contain chemical substances, so they
should be disposed of properly.
Headphone Operation
1. Connecting the headphones into
the 3.5mm headphone jack (11)
will deactivate the speakers.
2. Sound adjustments made to the
Volume Control Dial (13) also
aect the sound through the
headphones.
Note: Be sure to turn down the volume before connecting or
putting on the headphones.
To Next Page
Loading...