08
USING THE RADIO
During operation, you can enter into the System menu in
either DAB or FM mode - rst press and hold the INFO/
MENU button (7) to enter into the Menu, then repeatedly
press the SKIP- / SKIP+ button (6) followed by pressing the
PLAY/PAUSE/SELECT button (8) to select “System”.
Inside the “System”, you can select the following sub menus:
Language / Factory Reset / Software Upgrade / SW version
To enter into those sub menus, repeatedly press the SKIP- /
SKIP+ button (6) followed by pressing the PLAY / PAUSE/
SELECT button (8) to conrm. To step back through the
menu to the station display, press and hold the INFO / MENU
button (7) again and then release.
Language
You can change the language of your radio, there are
6 options available: English / Dutch / Italian / French /
Portuguese.
Note: A “*” will be displayed to indicate the current setting.
Factory Reset
You can reset your radio and restore all of the original factory
settings.
To perform factory reset, select <Yes> inside the “Factory
Reset” menu, the unit will switch to DAB or FM mode and
perform auto scan function, the display will show ”Restarting
...” and then ”Scanning ...”, after the reset is completed, the
unit will stay in DAB or FM mode.
Note: All of your stored DAB & FM presets will be deleted
once the reset has taken place.
To Next Page
Loading...