FAST & PUNCHY SMOOTH & OPEN QUIET & DETAILED
Audient Ltd
Aspect House
Herriard
Hampshire
RG25 2PN
United Kingdom
Tel: 0044 1256 381944
www.audient.com
Clocking: Further Information
ASP880 can also be clocked from external devices via the BNC Word Clock input (13).
To do this connect a 75Ω BNC cable from the word clock output of the master
clock device to the word clock input on the back of ASP880 (13).
On the front panel of ASP880, press the sample rate button (11) until the button flashes or
illuminates green. The button will be solidly illuminated green when it is locked to the external
master clock source and the button will flash when there is no stable clock source is present.
Integrating Outboard: A-D Insert Points
ASP880 can easily integrate EQ, compression and creative processing before the AD
converter while tracking. To achieve this simply:
• Feed the outboard from the ASP880 analogue outputs (14)
• Connect the outboard back into the ASP880 ADC inputs (15)
• Switch on the A-D button (5) to insert your processing between mic pre & ADC!
Triangle of Tone: Variable Impedance
ASP880’s variable input impedance switch allows
you to explore tonal changes from loading your
microphones differently. Most dynamic and ribbon
types will produce notably different tones when
lightly or heavily loaded by the mic pre. Listen
for changes in speed, detail, punch and hardness!
FAST
SLOW
DETAILED
GLUED
SOFT HARD
HI
LO
MED
To Previous Page
Loading...
Need help?
General
