EasyManua.ls Logo

Audio Control EQL - Specifications

Default Icon
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Specifications
All specifications are measured at 14.4 Vdc (standard automotive
voltage).
Frequency Response: 10 Hz to 20 kHz ± 1 dB
Total Harmonic Distortion (THD): 0.005%
Signal to Noise Ratio (SNR): 110 dB at full output
Maximum Output Level: 7.5 volts rms
Input Gain: ± 18 dB
PFM Filter Slope: 18 dB per octave
PFM Frequency: Programmable 15 to 100 Hz
Factory Shipped @ 33Hz
Power Supply: Variable isolation. Trans-
former switching supply
Fuse Rating: 2 amps
Size: 1.25"h x 8.9" w x 6.9" d
Weight: 3 lbs
Balanced Input Yes
Ground Isolation Jumpers Yes
Country of origin: USA
© AudioControl 1998. AudioControl is a division of
Electronic Engineering and Manufacturing, Inc.
All rights are reserved.
AudioControl, AudioControl Industrial, Performance
Match, Making Good Stereo Sound Better, EQX, ESP-2,
MVC, ESP-3, System90, and The Epicenter are all trademarks
of Electronic Engineering and Manufacturing, Inc.
This manual is written, designed, printed, folded and stuffed
into a box in the U.S.A. on yet another rainy day.
Uh-oh! The roof is starting to leak. . .
Specifications are subject to change - just like our
Pacific Northwet weather.
25
Specifications

Related product manuals