Audio enhancement K-SRC14 - Page 31

31
Rev.2.10
CMI
Change
notification of
microphone
ID registration
Change
notification
Microphone (XD
ID)
XD ID (20 bits) is
specified by the
character string
(5 bytes) of a
hexadecimal
form.
Receiver (XD
ID)
XD ID (20
bits) is
specified by
the character
string (5
bytes) of a
hexadecimal
form.
$CMI:12345:23456[CR][LF]
ALM
Alert
Change
notification
Refer to (*1)
Refer to (*1)
$ALM: 11H,22H,33H,44H,55H: 12H,23H,34H,56H,
78H:1:63[CR][LF]
ALB
Alert message
from alert Button
Change
notification
Receiver (XD ID)
XD ID (20 bits) is
specified by the
character string
(5 bytes) of a
hexadecimal
form.
None
$ALB:23456[CR][LF]
RAL
Release Alert
Setting
None
None
$RAL[CR][LF]
Response
None
None
$RAL[CR][LF]
ALL
Alert message
Location
Change
notification
The number of
alert messages N
(N=1-5）
(Parameter
2 -6)
RF signal
strength: 0-63
is specified by
the character
string (2
bytes) of a
hexadecimal
form.
$ALL:2:12345:23456:1:34:12345:78910:0:20[CR][LF]
SAA(*2)
SAA
(Set Audio Area)
Setting
The threshold
level of the signal
strength of RCV
for making a
microphone mute
(and For Alert
status is changed
to non-pair alert
from paired alert)
0:Default
1: Area1
2: Area2
3: Area3
-
$SAA:1[CR][LF]
*An area of default setting is same as an area of “RF
Tx power setting” of DIP SWITCHES.
Default > Area1 > Area2 > Area3
Response
The threshold
level of the signal
strength of RCV
for making a
microphone mute
0:Default
1: Area1
2: Area2
3: Area3
$SAA:1[CR][LF]
Parameter
Content
Comment
Parameter1
Alert information
Microphone (XD ID)
DET ID (20 bits) is specified by the
character string (5 bytes) of a
hexadecimal form.
Parameter2
Receiver /WAP (XD ID)