Audio enhancement K-SRC14 - Page 32

32
Rev.2.10
XD ID (20 bits) is specified by the
character string (5 bytes) of a
hexadecimal form.
Parameter3
Paring status bit:
0 = not paired, 1 = paired
The connection state of Microphone and
Receiver before activating an Alert.
Parameter4
RF signal strength: 0-63 is specified by
the character string (2 bytes) of a
hexadecimal form.
It is a linear value showing signal strength.
Parameter
Volume
Parameter
Volume
Parameter
Volume
00
0bB
08
-16dB
16
-32dB
01
-2dB
09
-18dB
17
-36dB
02
-4dB
10
-20dB
18
-40dB
03
-6dB
11
-22dB
19
-44dB
04
-8dB
12
-24dB
20
-48dB
05
-10dB
13
-26dB
21
-60dB
06
-12dB
14
-28dB
22
-70dB
07
-14dB
15
-30dB
Each QDS response command returns not the physical ON/OFF status of the DIP switch but the current setting status
(*1) Parameter of ALM command.
(*2)
･
When want to MUTE automatically as soon as possible in the place where a teacher left the classroom, do MUTE automatically in voice
call areas; can set it. [about: 5M/10M/15M/20M]
Please consult your dealer it will be set by serial communication command.
･During SAA muting: microphone LED on the receiver will be off