Need help?Do you have a question about the Audio Legion AL1200.1D and is the answer not in the manual?
Steps for preparing the amplifier installation, including safety and location.
Details on connecting the power, ground, and remote turn-on wires to the amplifier.
Proper connection of ground and remote turn-on wires to the amplifier.
Connection of +12V power and speaker outputs, noting impedance and fuse requirements.
Illustrates the connection of +12V, GND, and REM terminals from the head unit.
Diagram for connecting +12V, GND, REM, and speaker outputs to a single amplifier.
Detailed steps for linking master and slave amplifiers for speaker connection.
Diagnosing problems based on Power and Protect LED status.
General| Channels | 1 |
|---|---|
| Amplifier Class | D |
| Frequency Response | 10 Hz - 250 Hz |
| Input Sensitivity | 0.2V - 6V |
| Subsonic Filter | 10Hz - 50Hz |
| Phase Shift | 0° - 180° |
| Efficiency | > 85% |
| Power Output (1 Ohm) | 1200W |
| Power Output (2 Ohm) | 800W |
| Bass Boost | 0 dB - 12 dB |
To Next Page
