Need help?Do you have a question about the Audio Legion AL700.1D and is the answer not in the manual?
Instructions for connecting +12V, GND, and REM terminals.
Connecting the amplifier to the vehicle's chassis ground.
Connecting the remote turn-on wire from the head unit.
Connecting the amplifier to the positive battery terminal.
Connecting loudspeakers to the amplifier output terminals.
Diagnosing issues when the Protect LED is illuminated.
General| Channels | 1 |
|---|---|
| Frequency Response | 10 Hz - 250 Hz |
| Signal to Noise Ratio | > 90 dB |
| Input Sensitivity | 0.2V - 6V |
| Subsonic Filter | 10 Hz - 50 Hz |
| Fuse Rating | 40A |
| Bass Boost | 0 dB - 12 dB |
To Next Page
