Audio Physic AVANTI - Technical Specifications; Physical Dimensions and Weight; Electrical and Acoustic Performance; Driver Configuration

17
AUDIO PHYSIC AVANTI english
Technical Specications
Height 41.5“
Width 6.7“
Depth 9.5“
Required Space: Width x Depth 8.3“ x 11.8“
Weight 24 kg
29 kg (glass design)
Recomm. amplier power 30 - 180 watts
Impedance 4 Ohm
Frequency range 31 Hz - 40 kHz
Sensitivity 88 dB
Loudspeaker systems
Woofer 1 x 7“
Midrange 1 x 5.9“ HHCM III
Tweeter 1 x 1.75“ HHCT III
Some sound advice for even more aenon to detail
If you want to boost the sound of the AVANTI even more, you should denitely try our „VCF II M8 Magnec“
vibraon control feet (see right illustraon). The vibraon control feet dramacally reduce the transfer
of vibraon between the loudspeaker and the set-up space. When excited by sound energy, oors tend to
develop their own vibraons. These micro-vibraons can have a detrimental eect on the acousc paern.
The VCF II M8 Magnec feet interrupt this radius of vibraon. The result is an audible bonus of ne denion
and precision delity. Your AUDIO PHYSIC specialised dealer is pleased to advise you, or simply visit our
accessories web shop at www.audiophysic.de.
More sound through innovation
The cutting-edge AUDIO PHYSIC VCF II M8
Magnetic feet are highly effective in
decoupling the loudspeakers from the oor.
The acoustic pattern gains an even higher
level of depth, precision and natural
quality. What‘s more, the feet reliably
protect sensitive oors from scratches.
Thanks to the M8 threads, the VCF II M8
Magnetic can be conveniently attached to
the loudspeaker traverses.