APx517 B Series Acoustic Analyzer: Specifications 35
APx517 B Series acoustic audio analyzer
Specifications
with APx500 v6.0.1 or higher measurement software
October 28, 2020 NP0020.00045 rev. 000
This illustration shows an APx517 B Series with the 1/4 inch headphone jack.
These specifications cover the analog input, power amplifier output, headphone amplifier out-
put, and General and Environmental specifications of the APx517 B Series analyzer.
The APx517 has a headphone amplifier connector panel bay that can accepts one of three con-
nector panels: 1/4 inch, 3.5 mm, and Dual BNC.
Specifications for the available interface modules, including DIO, DSIO, HDMI, PDM, and
Bluetooth, are found in other sections of this document.
Specification begin on the next page.
To Next Page
Loading...
Need help?
General
