Audio Pro Black Pearl V.2 User Manual

Black Pearl
If you are looking for a mature HiFi speaker in a small
format, Black Pearl is the perfect choice. A high-quality
6 1/2” woofer and a brilliant 3/4” soft dome tweeter ensure
absolute pure HiFi.
Bass reproduction is on the same level as larger floor-
standing speakers.
Black Pearl shares many similarities with the award winning
Black Diamond - identical drivers, bi-wiring possibilities
and looks.
Black Pearl is also a good choice for rear speakers in a 5.1
surround home theater system.
BLACK PEARL
Type: Bass reflex
Tweeter: 3/4” dome
Woofer: 6 1/2”
Frequency range: 34-22.000 Hz
Sensitivity (1W/1M): 90 dB
Impedance: 4 ohm
Crossover frequency: 3.200 Hz
Amplifier requirement: 10-100W
Dimensions (WxHxD mm): 188x340x310 mm
Color finish: Black high-gloss

Audio Pro Black Pearl V.2 Specifications

General

Amplifier	Class D
Woofer	5.25-inch
Crossover Frequency	2.5kHz
Inputs	RCA, Optical
Outputs	Subwoofer output
Tweeter	1-inch silk dome

Summary

Black Pearl Speaker

Speaker Type

Specifies the enclosure design of the speaker, a bass reflex system.

Tweeter Specification

Details the size and type of the high-frequency driver, a 3/4" soft dome tweeter.

Woofer Specification

Details the size of the low-frequency driver, a 6 1/2" woofer.

Frequency Range

Indicates the speaker's audible frequency response from 34 Hz to 22,000 Hz.

Sensitivity

Measures speaker efficiency: 90 dB at 1 meter with 1 watt input.

Impedance

Specifies the speaker's electrical resistance, rated at 4 ohms for amplifier compatibility.

Crossover Frequency

Defines the frequency at which the signal is divided between the woofer and tweeter.

Amplifier Power Requirement

Recommends compatible amplifier power output, ranging from 10 to 100 watts.

Dimensions

Provides the physical size of the speaker in millimeters (Width x Height x Depth).

Color Finish

Describes the exterior appearance of the speaker as a black high-gloss finish.