To Next PageTo Next Page
Need help?Do you have a question about the Audio Pro Bravo FX-10 and is the answer not in the manual?
Power| amplifier power | 150 Watt |
|---|
Speaker Specifications| tweeter | 1" Ringradiator |
|---|---|
| midwoofer | 2 x 5 1/4" |
| subwoofer | 8" Long throw woofer |
Frequency and Impedance| frequency range | 18 - 23, 000 Hz |
|---|---|
| impedance | 4 ohm |
| lowpass filter | 80Hz, 24dB/Octave |
| highpass filter | 120Hz, 4:th order passive filter |
| crossover frequencies | 120Hz, 2, 600Hz, 24dB - 6/12dB, 18dB |
Weight and Dimensions| dimensions | 276 x 1100 x 375 mm |
|---|---|
| weight | 28.4 Kg/each |
Explains the proprietary ace-bass technique for enhanced bass reproduction in smaller enclosures.
Instructions on how to carefully unpack the product and check for damages, keeping the original packaging.
Guidance on attaching spikes or using rubber feet, with a safety note about using spikes.
Details on connecting the speaker for stereo and multichannel audio setups with important cautions.
Instructions for turning the subwoofer amplifier ON/OFF and recommended usage during installation and periods of non-use.
Explanation of automatic standby mode based on signal detection and the constant ON mode.
Describes the red indicator showing the subwoofer amplifier's operational status (ON or standby).
Describes the red indicator on the front panel showing the subwoofer amplifier is operational.
Instructions on adjusting the subwoofer's sound level, with a caution about program material energy.
Instructions for adjusting the subwoofer level when using a 5.1 connection via LINE-IN.
Recommendations for speaker placement to optimize room acoustics and bass amplification.
Guidance on checking all connections and cables for proper installation and integrity.
Information about the built-in overload protection that safeguards the subwoofer from high volume settings.
Details on the amplifier power and types of drive units used in the loudspeaker system.
Information on the frequency range, impedance, and crossover filter characteristics.
Specifications for the loudspeaker's physical dimensions, including feet, and its net weight.
