Audio Pro BASIQ S100 User Manual

Tekniska data:
Typ:...........................2-vägs basreflex
Bestyckning:
Diskant:.....................3/4” Dome
Bas:......................................4”
Delningsfrekvens:....................5.000Hz
Frekvensomfång:...............90-20.000Hz
Känslighet: (1W / 1M)....................87dB
Impedans:..............................8 ohm
Rek. förstärkareffekt:............20 - 100 W
Dimensioner:(BxHxDmm)....165x233x180
Technical data:
Enclosure:................2-way bass reflex
Drive units:
Tweeter:....................3/4” Dome
Woofer:.................................4”
Crossover:..............................5.000Hz
Frequency range:..............90-20.000Hz
Sensitivity: (1W / 1M)....................87dB
Impedance:................................8 ohm
Amp. requirement:...............20 - 100 W
Dimensions:(WxHxD mm)...165x233x180
Placering:
Placement:
Audio Pro AB, Helsingborg, Sweden
Swedish/English
BASIQ S100
SUB
F100 tech data.pmd 2004-02-29, 12:371

Audio Pro BASIQ S100 Specifications

General

Brand	Audio Pro
Model	BASIQ S100
Category	Speakers
Language	English

Summary

Technical Data

Speaker Type

Specifies the speaker enclosure type and driver configuration.

Drive Units

Details the tweeter and woofer components used in the speaker.

Crossover Frequency

The frequency at which audio signals are split between drivers.

Frequency Range

The span of audible frequencies the speaker can reproduce.

Sensitivity

Measures speaker efficiency in dB for 1W at 1 meter.

Impedance

The electrical resistance of the speaker, measured in ohms.

Amplifier Requirement

Recommended amplifier power output range for optimal performance.

Dimensions

Physical measurements of the speaker in millimeters.

Placement