Audio Pro wigo Wi-110 User Manual

Tekniska data:
Typ:......................................Basreflex
Bestyckning:
Diskant:............1” Titanium Dome
Bas:...................................4,5”
Delningsfrekvens:.....2.500Hz 6/12dB
Frekvensomfång:...............60-30.000Hz
Känslighet: (1W / 1M)....................87dB
Impedans:..............................4 ohm
Rek. förstärkareffekt:............25 - 100 W
Dimensioner:(BxHxDmm)....143x257x200
Technical data:
Enclosure:..........................Bass reflex
Drive units:
Tweeter:...........1” Titanium Dome
Woofer:..............................4,5”
Crossover:...................2.500Hz 6/12dB
Frequency range:..............60-30.000Hz
Sensitivity: (1W / 1M)....................87dB
Impedance:................................4 ohm
Amp. requirement:...............25 - 100 W
Dimensions:(WxHxD mm)...143x257x200
Placering:
See the enclosed Audio Pro instruction
manual for further information.
Se medföljande Audio Pro instruktions-
bok för ytterligare information.
Placement:
Audio Pro AB, Helsingborg, Sweden
Swedish/English
Monitor / Surround
Wi-110
WI-110 tech data.pmd 2008-05-21, 16:141

Audio Pro wigo Wi-110 Specifications

General

Brand	Audio Pro
Model	wigo Wi-110
Category	Speakers
Language	English

Summary

Technical Data

Enclosure Type

Specifies the enclosure type, which is Bass reflex.

Drive Units

Details the speaker drivers: 1” Titanium Dome tweeter and 4.5” woofer.

Crossover Frequency

Specifies the crossover frequency and slope: 2,500Hz 6/12dB.

Frequency Range

Indicates the speaker's frequency response from 60Hz to 30,000Hz.

Sensitivity

States the speaker sensitivity as 87dB at 1W/1M.

Impedance

Specifies the speaker impedance, which is 4 ohm.

Amplifier Requirement

Recommends amplifier power between 25W and 100W.

Dimensions

Provides the speaker dimensions in mm: 143x257x200 (WxHxD).

Placement

Placement Guidance

Refers to the enclosed manual for detailed placement instructions.