Need help?Do you have a question about the Audio-Techica ATH-SQ1TW and is the answer not in the manual?
General| Type | True Wireless |
|---|---|
| Driver Diameter | 5.8 mm |
| Impedance | 16 ohms |
| Microphone Type | MEMS |
| Bluetooth Version | 5.0 |
| Supported Bluetooth Profile | A2DP, AVRCP, HFP, HSP |
| Supported Codec | SBC, AAC |
| Water Resistance | IPX4 |
| Frequency Response | 20 Hz - 20, 000 Hz |
| Microphone Frequency Response | 100 Hz - 10, 000 Hz |
| Battery Life (Earbuds) | 6.5 hours |
| Battery Life (with charging case) | 19.5 hours |
| Charging Time (Earbuds) | 1.5 hours |
| Charging Time (Charging Case) | 2 hours |
| Weight (Each Earbud) | Approximately 5.2 g |
| Weight (Charging Case) | 34 g (1.2 oz) |
Identifies and describes the parts and indicators of the headphones, including touch sensors and microphones.
Details the components of the charging case, including the cover, battery jack, and charging indicator lamp.
Lists and describes the included accessories such as USB charging cable and eartips.
Provides step-by-step instructions for charging both the headphones and the charging case using the USB cable.
Explains how to charge the headphones using the power stored in the charging case.
Describes the procedure to turn on the headphones by removing them from the charging case.
Details how to turn off the headphones by placing them back into the charging case.
Guides users through the standard process of pairing the headphones with a Bluetooth device.
Explains the simplified Bluetooth pairing process for Android devices using Fast Pair technology.
Discusses re-pairing requirements and multipairing capabilities of the product.
Instructions on how to play music, adjust volume, and pause playback using the headphones.
Details how to make, receive, and end calls, and adjust call volume using the headphones.
Describes how to activate and use the hear-through mode to listen to ambient sounds.
Explains the low latency mode for reducing audio delay during gaming or video watching.
Details the automatic power-off feature that activates after a period of inactivity.
Shows the indicator lamp patterns for searching and connecting Bluetooth devices.
Details indicator lamp states for waiting, connecting, and music playback.
Explains the indicator lamp patterns for low battery status.
Discusses selecting the correct eartip size for optimal fit and sound quality.
Provides instructions on how to remove and attach eartips to the headphones.
Step-by-step guide to reset the headphones if they are not functioning correctly.
Troubleshooting steps for when the product does not power on.
Solutions for issues encountered during the Bluetooth pairing process.
Steps to resolve problems with no audio output or low sound volume.
Guidance for when audio is only playing through a single headphone.
Troubleshooting tips for audio distortion, noise, or intermittent sound.
Addresses issues where the caller's voice is inaudible or too quiet.
Troubleshooting steps for when the charging case fails to charge.
Solutions for situations where the headphones are not charging.
Technical specifications for the headphones, including driver size, sensitivity, and frequency response.
Technical specifications for the product's microphone, including type, polar pattern, and sensitivity.
Details Bluetooth version, communication range, frequency band, and supported profiles.
Covers power supply, charging time, operating time, weight, water resistance, and operating temperature.
To Next Page
