12
Using the product
Connecting and using the headphones
You can monitor sounds being recorded by connecting headphones to the headphone jack. Also, you can
directly monitor your own voice from the product while listening to a sound source from your computer.
1. Connect the headphones to the headphone jack.
2. Turn the headphone level control dial to adjust the volume.
• The headphone level control dial adjusts the volume of the headphone output; it does not adjust the
microphone level.
Using the mix control dial
The product allows you to monitor your own voice from the product while listening to a sound source from your
computer. You can use the mix control dial to adjust the balance of the volume level of the sound source stored
on the computer and the monitored volume level of the audio being input.
Turning it toward the MIC side
increases the monitored volume
level of the audio being input.
Turning it toward the COM side
increases the volume level of the
sound source stored on the computer.
To Next Page
Loading...
