12
Cleaning
Get into the habit of regularly cleaning the product to ensure that it will last for a long time.
Do not use alcohol, paint thinners or other solvents for cleaning purposes.
Headphones, remote control with mic, and
Bluetooth
and NFC transmitter/receiver
To clean, wipe with a dry cloth.
Natural oils from the skin are particularly likely to build up on the areas where the
eartips attach to the headphones (see figure at right). If these areas are not cleaned,
the eartips can become detached. Clean them regularly. Do not touch the areas where
sound is produced, as they are delicate, and touching them could cause damage.
Cable and USB charging cable
Wipe away any perspiration or dirt with a dry cloth immediately after use.
Failure to clean the cable may cause it to deteriorate and harden over time, resulting in malfunction.
Eartips
Remove eartips from the headphones and clean them with a diluted mild detergent. After cleaning, dry before using
again.
• If the product will not be used for an extended period of time, store it in a well-ventilated place free from high
temperatures and humidity.
Eartip attachment part
Sound
reproduction
part
ATH-CKS550BT_UM_V2_6L_book.indb 12 2017/01/23 10:03
To Next Page
Loading...
Need help?
General
