14
Troubleshooting
Problem Solution
Power is not supplied. • Charge the product.
Unable to pair. • Devices that communicate using
Bluetooth
Ver. 2.1+EDR or higher can be used
with the product.
• Place the product and the
Bluetooth
device within 1 m (3.3') of each other.
• Set the profiles for the
Bluetooth
device. For procedures on how to set profiles,
refer to the
Bluetooth
device’s user manual.
No sound is heard / Sound is faint. • Turn on the power of the product and the
Bluetooth
device.
• Turn up the volume of the product and the
Bluetooth
device.
• If the
Bluetooth
device is set to the HFP/HSP connection, switch to the A2DP
connection.
• Remove obstacles between the product and the
Bluetooth
device and place them
closer together.
• Switch the output of the
Bluetooth
device to the
Bluetooth
connection.
Sound is distorted / Noise is heard
/ Sound cuts out.
• Turn down the volume of the product and the
Bluetooth
device.
• Keep microwaves and other devices such as wireless routers away from the
product.
• Keep TVs, radios, and devices with built-in tuners away from the product. These
devices can also be affected by the product.
• Turn off the equalizer settings of the
Bluetooth
device.
• Remove obstacles between the product and the
Bluetooth
device and place them
closer together.
Cannot hear the voice of the caller
/ Voice of the caller is too quiet.
• Turn on the power of the product and the
Bluetooth
device.
• Turn up the volume of the product and the
Bluetooth
device.
• If the
Bluetooth
device is set to the A2DP connection, switch to the HFP/HSP
connection.
• Switch the output of the
Bluetooth
device to the
Bluetooth
connection.
Unable to pair using NFC. • Make sure your device is an NFC-compatible
Bluetooth
device.
• Set your NFC-compatible
Bluetooth
device so that the NFC function can be used.
• Touch the product to the correct location of your NFC-compatible
Bluetooth
device.
• Depending on the NFC-compatible
Bluetooth
device you are using, the NFC
sensitivity may not be strong enough to connect to the product with just one
touch. In this case, refer to the NFC-compatible
Bluetooth
device’s user manual.
• Depending on the NFC-compatible
Bluetooth
device you are using, it may take
some time to communicate via NFC. Keep the product and your NFC-compatible
Bluetooth
device touching until the connection is completed.
• Remove your NFC-compatible
Bluetooth
device from its case so that it can
communicate via NFC.
The product cannot be charged. • Securely connect the USB charging cable and charge the product.
•
For details about how to operate your
Bluetooth
device, refer to the device’s user manual.
•
If the problem still remains, reset the product. To reset the product, refer to “Reset function” in “Other functions”.
ATH-CKS550BT_UM_V2_6L_book.indb 14 2017/01/23 10:03
To Next Page
Loading...
Need help?
General
