Need help?Do you have a question about the Audio Technica ATW-1701 and is the answer not in the manual?
Operating Environment| operating frequencies | 2.4 GHz ISM band |
|---|---|
| operating range radius | 30 m (100') |
| operating range diameter | 60 m (200') |
| operating temperature range | 0° C to +40° C (32° F to 104° F) |
| charging temperature range | 5° C to +35° C (41° F to 95° F) |
Receiver Specifications| maximum output level | +6 dBV |
|---|---|
| monitor output level | 70 mW +70 mW (32Ω) |
| power supply voltage | 100-240V AC (50/60 Hz) to 5V DC 0.5A |
| internal battery voltage | 3.7V |
| battery life | 12 hours |
| battery charging time | 4 hours 30 minutes |
| dimensions | 56.0 mm W x 91.4 mm H x 27.8 mm D |
| net weight | 105 grams |
UniPak Transmitter Specifications| rf output power | 10 mW |
|---|---|
| battery life | >7 hours (alkaline) |
| dimensions | 70.2 mm W x 107.0 mm H x 24.9 mm D |
| net weight without batteries | 100 grams |
Handheld Transmitter Specifications| rf output power | 10 mW |
|---|---|
| battery life | >7 hours (alkaline) |
| dimensions | 254.8 mm long, 50.0 mm diameter |
| net weight without batteries | 280 grams |
Details optimal placement for the receiver to minimize interference and reflections.
Explains the audio output jack and selection switch for balanced/unbalanced signals.
Details the controls and indicators on the front, rear, and sides of the ATW-R1700 receiver.
Explains how to attach the receiver to a camera or tripod using the mount.
Instructions for connecting the AC adapter and USB cable for power and charging.
Guidance on positioning the receiver antennas for optimal signal reception.
Steps for installing AA batteries into the handheld transmitter.
Details the functions of the power/battery indicator, mute, and pairing switches.
Instructions for adjusting the microphone input level using the trim control.
Steps for installing AA batteries into the UniPak transmitter.
Details the functions of the power/battery indicator, mute, and pairing switches.
Information on connecting audio devices and the fixed antenna.
Steps for turning on the receiver and transmitter for system operation.
Guide to adjusting transmitter input levels for optimal performance without distortion.
Instructions for pairing transmitters with the receiver and assigning System IDs.
Procedures for clearing individual or all transmitter ID pairings from the receiver.
Ten tips for optimizing performance, including battery usage and placement.
Explanation of the automatic frequency selection process in the 2.4 GHz band.
Technical details for operating frequencies, dynamic range, and operating range.
Details on receiving system, output levels, power, battery, and dimensions.
Technical data for UniPak and Handheld transmitters, including RF output and battery life.
To Next Page
