Audio Technica ATW-R2100a - Page 2

ATW-R2100a
Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England
©2010 Audio-Technica U.S., Inc. audio-technica.com 0001-0032-01
Specications
In the interest of standards development, A.T.U.S. offers full
details on its test methods to other industry
professionals on request.
Specications are subject to change without notice.
front
back
True diversity
60 dB nominal, 55 dB minimum
20 dBuV at 60 dB S/N ratio (50 ohms
termination)
+9 dBV
+4 dBV
Two position switch: 0/-12 dB
BNC-type, 50 ohms
Bias voltage 12V DC, 60 mA, each
12-18V DC, 500 mA
210.0 mm (8.27") W x 162.2 mm (6.39") D x
44.0 mm (1.73") H (not including BNC
connectors or feet)
1.0 kg (35.3 oz), without accessories
Two exible UHF antennas; AC adapter
(country dependent); rack-mount adapters
Receiving system
Image rejection
RF Sensitivity
Maximum output level
XLR, balanced:
1
/
4
" (6.3 mm), unbalanced:
Balanced audio output attenuator
Antenna input
Power requirements
Dimensions
Net weight
Accessories included
71