Audio Technica ATW-T3201 User Manual (English)

Questions and Answers:

H
Harold NewtonAug 2, 2025
Why is there unwanted noise from my Audio Technica ATW-T3201?
- P
  paula03Aug 3, 2025
  Unwanted noise can occur for several reasons. Make sure there isn't a noise source nearby, such as a fluorescent lamp or electrical component. Confirm each transmitter uses a different frequency. Check that the receiver's output terminal is correctly connected and that the receiver isn't sharing an outlet with another noisy component. Also, ensure no other nearby wireless systems use the same frequency band and adjust the squelch level if needed.
K
Kelly ArellanoAug 13, 2025
What to do if there is no voice output from Audio Technica ATW-T3201 Receiver?
- Z
  zmckenzieAug 13, 2025
  If you're not getting any sound, or the sound is very quiet, check these things: Make sure the transmitter and receiver channels are correctly set. Ensure that the power buttons on both the transmitter and receiver are turned on. Verify the antennas are properly connected. Confirm that all connected components, like a mixer, are correctly connected to the receiver. Check that the audio output and the audio output level of connected components are not set to the minimum.
S
sbakerAug 23, 2025
How to fix distorted sound on Audio Technica Receiver?
- D
  Debra VillanuevaAug 23, 2025
  Sound distortion can occur if the audio output level is too high, or if the volume of any connected component is too high. Ensure that the audio output level and the volume of connected components are not set too high.

Audio Technica ATW-T3201 Specifications

General

Quantity	1
Form factor	Bodypack transmitter
Antenna type	Built-in
Display type	OLED
Product color	Black
Built-in display	Yes
Housing material	Metal
Operating frequency	60 MHz
Operating frequency type	Ultra High Frequency (UHF)
Battery type	AA
Battery voltage	1.5 V
Battery life (max)	9.5 h
Number of batteries supported	2