Need help?Do you have a question about the Audio Technica System 10 Stompbox ATW-1501 and is the answer not in the manual?
General| Frequency Range | 2.4 GHz ISM band |
|---|---|
| RF Output Power (Transmitter) | 10 mW |
| Type | Digital Wireless |
| Audio Frequency Response | 20 Hz to 20 kHz |
| Total Harmonic Distortion | < 0.1% |
| Antenna (Receiver) | Internal |
| Output Connector (Receiver) | 1/4" TS unbalanced |
| Antenna (Transmitter) | Integral |
| Input Connector (Transmitter) | 1/4" TS unbalanced |
| Battery Type (Transmitter) | 2 x AA |
| Operating Range | Up to 100 feet (30 meters) |
| Battery Life | Approx. 6 hours (alkaline) |
Covers warnings about electric shock, fire, rain, moisture, and modifications to the equipment.
Addresses RF exposure statement and potential interference with medical devices like pacemakers.
Details of receiver top panel controls including outputs, indicators, System ID, pairing, and foot switch.
Description of the receiver's rear panel controls: Output Mode Selector and Power Input Jack.
Instructions for battery installation, power/mute/battery indicator, and mute lock function.
Details on mute function, input connection, antenna, pairing switch, level control, and System ID display.
Covers receiver and transmitter power-on sequence and status indicators for system operation.
Guidance on adjusting the transmitter's input level for optimal signal.
Instructions for pairing multiple transmitters with the receiver.
Procedures for clearing individual or all transmitter pairings from the receiver.
Explains the system's automatic frequency selection process for clear communication.
Technical specifications for the entire System 10 Stompbox wireless system.
Detailed technical specifications for the ATW-R1500 receiver unit.
Detailed technical specifications for the ATW-T1001EX UniPak transmitter.
To Next Page
