AudioArts Engineering R-60 - Page 14

Page 3 - 17
R-60 / Nov 1994R-60 / Nov 1994
R-60 / Nov 1994R-60 / Nov 1994
R-60 / Nov 1994
CC
CC
C
ONSOLEONSOLE
ONSOLEONSOLE
ONSOLE
L L
L L
L
OGICOGIC
OGICOGIC
OGIC
& I/O C & I/O C
& I/O C & I/O C
& I/O C
ONNECTIONSONNECTIONS
ONNECTIONSONNECTIONS
ONNECTIONS
Logic FollowLogic Follow
Logic FollowLogic Follow
Logic Follow
(CT1, LF-60 load sheet dwg)
Pin 1 - REMOTE ON
Pin 2 - REMOTE OFF
Pin 3 - ON TALLY
Pin 4 - MACHINE COMMON
Pin 5 - REMOTE STOP
Pin 6 - REMOTE START
Pin 7 - READY
Pin 8 - COUGH
Pin 9 - TALKBACK
Pin 10 - A/B LOGIC FOLLOW
Pin 11 - +5V LOGIC SUPPLY (FUSED)
Pin 12 - DIGITAL COMMON
Logic FollowLogic Follow
Logic FollowLogic Follow
Logic Follow
(CT2, LF-60 load sheet dwg)
Pin 1 - A, REMOTE ON
Pin 2 - A, REMOTE OFF
Pin 3 - A, ON TALLY
Pin 4 - A, MACHINE COMMON
Pin 5 - A, REMOTE STOP
Pin 6 - A, REMOTE START
Pin 7 - A, READY
Pin 8 - A, COUGH
Pin 9 - A, TALKBACK
Pin 10 - N.C.
Pin 11 - A, +5V LOGIC SUPPLY (FUSED)
Pin 12 - A, DIGITAL COMMON
Logic FollowLogic Follow
Logic FollowLogic Follow
Logic Follow
(CT3, LF-60 load sheet dwg)
Pin 1 - B, REMOTE ON
Pin 2 - B, REMOTE OFF
Pin 3 - B, ON TALLY
Pin 4 - B, MACHINE COMMON
Pin 5 - B, REMOTE STOP
Pin 6 - B, REMOTE START
Pin 7 - B, READY
Pin 8 - B, COUGH
Pin 9 - B, TALKBACK
Pin 10 - N.C.
Pin 11 - B, +5V LOGIC SUPPLY (FUSED)
Pin 12 - B, DIGITAL COMMON
Page 3 - 16
LL
LL
L
OGIC FOLLOGIC FOLL
OGIC FOLLOGIC FOLL
OGIC FOLL
OW OPTIONOW OPTION
OW OPTIONOW OPTION
OW OPTION
The R-60 Logic Follow option allows line input modules to interface with
two external source machines (tape players, cart machines, CD players, etc.),
each at different location. The machine being controlled is determined by the
A/B source select switch at the top of the module. The option consists of a
printed circuit board (or boards) mounted in the console's meterbridge.
Source machines are connected to the logic follow card and it in turn is
connected to the input module's control ports. Pinout information is as
follows:
R-60 / Jan 1995