Need help?Do you have a question about the AudioArts Engineering R-55 and is the answer not in the manual?
Instructions for unpacking the R-55 console and its accessories.
Guidance on placing and securing the R-55 console on a countertop.
Explanation of proper grounding procedures for the console and audio system.
Details on connecting and energizing the PS-6040 power supply.
Overview of connecting audio and control signals via DB-25 connectors.
Description of the console's mainframe and available module types.
Step-by-step guide for using the hand crimping tool for I/O wiring.
Method for making two connections to a single DB pin on subminiature D-type connectors.
Diagram illustrating the physical layout of modules within the R-55 console frame.
Description of the SL-55 module's function for stereo line input signals.
Configuration settings for the SL-55 module via PCB-mounted dipswitch.
Details on user wiring connections for the SL-55 module.
Pinout diagram for the SL-55 module's DB-25 connector.
Description of the OM-55 module handling console program, audition, and mono/pre outputs.
Wiring details for the OM-55 module's DB-25 and DB-9 connectors.
Pinout diagrams for the OM-55 module's DB-25 and DB-9 connectors.
Description of the CRS-55 module as the operator's monitor module.
Configuration settings for the CRS-55 module via PCB dipswitch.
Wiring details for the CRS-55 module's DB-25 connector.
Pinout diagram for the CRS-55 module's DB-25 connector.
Description of the SPN-55 module for telephone call-ins.
Procedures for pre-air communication between operator and callers.
Programming options for the SPN-55 module via PCB dipswitch.
Wiring details for the SPN-55 module's DB-25 connector.
Pinout diagram for the SPN-55 module's DB-25 connector.
Description of the LS-55 module for selecting and routing stereo line sources.
Information regarding programming options for the LS-55 module.
Wiring details for the LS-55 module's DB-25 connectors.
Pinout diagrams for the LS-55 module's DB-25 connectors.
Description of the TR-55 module's START/STOP and full function versions.
Pinout diagrams for the TR-55 module's DB-25 connector.
Description of the QMP-4 as a quad mono microphone preamplifier.
Programming the QMP-4 via its seven-position dipswitch.
Wiring connections for the QMP-4 using 12-position plug terminals.
Details on connecting power to the QMP-4 preamplifier.
Pinout diagram for the QMP-4's 12-position plug terminals.
Step-by-step instructions for installing the QMP-4 preamp assembly.
Description of the meterbridge components: VU meters, digital timer, and cue speaker.
Features and operation of the console's digital timer.
List of parts for the SL-55 Stereo Line Input module.
List of parts for the OM-55 Master Output module.
List of parts for the CRS-55 Control Room/Studio module.
List of parts for the optional SPN-55 Superphone Input module.
List of parts for the optional LS-55 Line Selector module.
List of parts for the optional TR-55/FF Tape Remote module.
List of parts for the optional TR-55/SS Tape Remote module.
List of parts for the QMP-4 Quad Mic Preamp module.
List of parts for the MBE-55 Mother Board (Extender).
List of parts for the MBR-55 Mother Board (Right).
List of parts for the Timer component.
List of parts for the Timer Display component.
List of parts for the PS-6040 Power Supply unit.
List of parts for the LED-3 Meter LED Lamp.
List of parts for the R-55 Frame assembly.
List of parts included in the R-55 Connector Kit.
List of major R-55 Console components and modules.
List of items included in the R-55 Spare Parts Kit.
Overall system flow diagram for the R-55 console.
Schematic diagrams for the SL-55 Stereo Line Input module.
Schematic diagrams for the OM-55 Output Master module.
Schematic diagrams for the CRS-55 Control Room/Studio module.
Schematic diagrams for the SPN-55 Superphone Module.
Schematic diagrams for the LS-55 Line Select module.
Schematic diagrams for the TR-55 Tape Remote module.
Schematic diagrams for the QMP-4 Quad Mic Preamp.
Schematic diagrams for the CLK-220 Timer.
Schematic diagrams for the CLD-220 Timer Display.
Schematic diagrams for the LED-3 Meter LED Lamp.
Schematic diagrams for the MBE-2606 Mother Board—Extender.
Schematic diagrams for the MBR-2000 Mother Board—Right.
Schematic diagrams for the PS-6040 Power Supply.
General| Brand | AudioArts Engineering |
|---|---|
| Model | R-55 |
| Category | Recording Equipment |
| Language | English |
To Next Page
