AudioArts Engineering R-55 - Power Connections

page 8 – 5
R-55 / Mar 2003
QUAD MIC PREAMP
Power Connections (CT7)
A ribbon cable connects the 10-pin connector on the QMP-4 (CT7) to the
power supply connector mounted on the right side of the console meterbridge
rear to provide power to the microphone preamplifier.
Pin 1 – Analog Ground
Pin 2 – Analog Ground
Pin 3 - +Phantom V
Pin 4 – +Phantom V
Pin 5 – +V In
Pin 6 – +V In
Pin 7 – -V In
Pin 8 – -V In
Pin 9 – Analog Ground
Pin 10 – Analog Ground