Need help?Do you have a question about the AudioBahn AW1208T and is the answer not in the manual?
Warning about potential hearing loss from continuous exposure to sound pressure levels over 100 dB.
Details key engineering and construction aspects of the woofers.
Describes the benefits of the polished chrome aluminum cast basket for alignment and rigidity.
Explains the 1-piece flared aluminum voice coil and former for strength and heat dissipation.
Details anodized aluminum former for efficient thermal transfer and improved power handling.
Explains how the extended pole piece provides a linear magnetic field, lowering distortion.
Describes the vented back plate for increased excursion and better heat dissipation.
Discusses the 4-layer, edge-wound voice coil design and its dual 2-ohm setup.
Details the 1" tall surround's resilience to temperature variations and damping capabilities.
Explains the flat spider design for balanced linear compliance and reduced harmonic distortion.
Highlights chrome finish for durability and aesthetic appeal in enclosures.
Describes the dust cap's role in increasing cone rigidity and improving power handling.
Provides key physical dimensions for the subwoofer models.
Box specifications for a compact, space-saving enclosure design.
Box specifications for a balanced everyday listening experience.
Box specifications optimized for achieving maximum Sound Pressure Level.
Specifications for sealed enclosure types, including minimum and maximum volumes.
Graphical frequency response for the AW1008T in a space saver enclosure.
Graphical frequency response for the AW1008T in an everyday performance enclosure.
Graphical frequency response for the AW1008T in an ultimate SPL enclosure.
Graphical frequency response for the AW1208T in a space saver enclosure.
Graphical frequency response for the AW1208T in an everyday performance enclosure.
Graphical frequency response for the AW1208T in an ultimate SPL enclosure.
Graphical frequency response for the AW1508T in a space saver enclosure.
Graphical frequency response for the AW1508T in an everyday performance enclosure.
Graphical frequency response for the AW1508T in an ultimate SPL enclosure.
Guidance on constructing rigid and well-braced subwoofer enclosures using MDF.
Instructions on calculating enclosure volume using dimensions and accounting for displacement.
Recommendations for using active 80-100Hz low pass crossovers for optimal performance.
Check connections, wiring, and ensure enclosure integrity for sound issues.
Inspect for burned wires or damaged components, often indicated by smell.
If issues persist, examine amplifier, source unit, and other processors.
Investigate vehicle layout before drilling, avoid gas/fluid lines, secure mounting.
Fuse +12V DC power wire at battery, disconnect power before connections, use identical fuses.
Specifications are subject to change without notice; check website or dealer for updates.
One-year warranty for manufacturer defects, applicable to original purchaser with receipt.
Enclosures replaced if defective; LEDs replaced if defective at purchase.
Covers damage from abuse, misuse, improper installation, unauthorized services, and altered serial numbers.
Contact authorized dealer or Audiobahn, confirm manufacturer defect before returning.
Acquire and clearly mark RA# on carton; shipping charges are consumer responsibility.
Provides Audiobahn Headquarters address, phone numbers, and operating hours.
To Next Page
General
