Need help?Do you have a question about the AudioBahn AWT15X and is the answer not in the manual?
Describes the polished chrome aluminum cast basket for alignment and rigidity.
Details the spun aluminum cone for stability, strength, and reduced distortion at low frequencies.
Explains the anodized aluminum former for efficient thermal transfer and improved power handling.
Discusses the extended pole piece for a linear magnetic field and better low frequency response.
Describes the vented back plate for increased excursion and higher power handling without damage.
Details the 4-layer, edge wound voice coil design for various impedance loads.
Explains the foam surround's resilience and damping capabilities for clarity.
Describes the flat spider for balanced linear compliance and reduced distortion.
Mentions the aesthetic chrome finish of the product.
Guidance on constructing rigid enclosures using MDF and internal bracing for optimal performance.
Formula and steps for calculating enclosure volume, accounting for material and speaker displacement.
Recommendation for using an active 80-100Hz low pass crossover for optimal subwoofer performance.
Outlines the one-year warranty period, coverage for manufacturer defects, and transferability.
Instructions for obtaining warranty service, including contacting dealers or Audiobahn.
Provides Audiobahn headquarters contact details for technical assistance and warranty inquiries.
To Next Page
General
