Need help?Do you have a question about the AudioBahn AWT18X and is the answer not in the manual?
Continuous exposure to sound pressure levels over 100 dB may cause permanent hearing loss.
Polished chrome aluminum cast basket ensures perfect alignment and rigidity for high SPL and loud bass response.
Provides stability and strength for extreme low-frequency output without cone failure, reducing distortion.
Black anodized aluminum for efficient thermal transfer, improving power handling by dissipating heat.
Provides a more linear magnetic field, reducing distortion and improving low-frequency response.
Stepped deeper for more excursion and vented for efficient cooling of the voice coil.
4-layer, edge-wound design allows for varied impedance loads; subwoofers are dual 2 ohm.
Resilient to temperature variations, provides consistent cone support and damping for clarity.
Balances linear compliance and provides symmetrical control for reduced mechanical distortion.
Aesthetic finish for the woofer components.
Ported box specifications including air space, port size, and tuning frequencies for this design.
Ported box specifications for daily use, including air space, port size, and tuning.
Ported box specifications for maximum sound pressure level, detailing air space and port dimensions.
Minimum and maximum sealed box volumes and SPL ratings for various models.
Frequency response graph for AWT10X in Space Saver enclosure.
Frequency response graph for AWT10X in Everyday Bass Performer enclosure.
Frequency response graph for AWT10X in Ultimate SPL Bass Box enclosure.
Frequency response graph for AWT12X in Space Saver enclosure.
Frequency response graph for AWT12X in Everyday Bass Performer enclosure.
Frequency response graph for AWT12X in Ultimate SPL Bass Box enclosure.
Frequency response graph for AWT15X in Space Saver enclosure.
Frequency response graph for AWT15X in Everyday Bass Performer enclosure.
Frequency response graph for AWT15X in Ultimate SPL Bass Box enclosure.
Frequency response graph for AWT18X in Space Saver enclosure.
Frequency response graph for AWT18X in Everyday Bass Performer enclosure.
Frequency response graph for AWT18X in Ultimate SPL Bass Box enclosure.
Guidelines for constructing rigid, well-sealed enclosures using MDF and internal bracing.
Formula and method for calculating the internal volume of a speaker enclosure.
Suggests using an active 80-100Hz low pass crossover for optimal subwoofer performance.
Inspect connections from amplifier to box and within the box for looseness.
Check the enclosure for leaks, cracks, or damage that could affect performance.
Look for burned wire leads or separated components and smell for burning.
Verify connections and settings of amplifier, source unit, and other processors.
Precautions for drilling, cutting, and securing the system in a vehicle.
Instructions on replacing fuses with identical types to prevent system damage.
Notes that specifications are subject to change without notice.
Details Audiobahn's consumer product warranty, including period, coverage, and requirements.
Lists items and conditions not covered by the Audiobahn warranty.
Procedures for contacting Audiobahn or an Authorized Dealer for warranty claims.
Requirements for obtaining and marking a Return Authorization Number (RA#) for product returns.
Provides Audiobahn headquarters address, phone numbers, and email for technical assistance.
To Next Page
General
