AudioCodes RXVCam50 AI HD - Wireless Remote Controller

9 | Page
Application
Wireless Remote Controller
Keys Instructions
1. SET: Use in combination with other keys to
confirm actions).
2. Standby: Press for the device to enter standby
mode; press again for the device to redisplay
the picture.
3. CAMERA SELECT: Select the camera to
control.
4. Number keys: Set or call 0-9 presets.
5. FOCUS (unsupported)
 + Focus in
 - Focus out
6. AUTO (unsupported)
7. MANUAL (unsupported)
8. ZOOM
 Press + to zoom in
 Press – to zoom out
9. SET PRESET | CLEAR PRESET
 Set Preset: Press and then press a
number key (0-9) to set a position.
Note that 10 presets can be set using
the RC.
 Clear Preset: Press and then press the
number key (0-9) to clear a preset.
 To clear all presets: Press the # key
three consecutive times (see Key
Combinations below for other possible
key combinations)
10. Pan/Tilt
 Up: Long-press ↑; release to stop
 Down: Long-press ↓; release to stop
 Left: Long-press ←; release to stop
 Right: Long-press →; release to stop
 HOME: Press for the camera lens to
return to the middle position, or to
enter the next menu.
11. BLC ON/OFF: Press to switch the back light
compensation on or off.
12. MENU
Press to open or close the On-Screen
Display (OSD) menu or return to the
previous menu.