AudioControl LC2i User Manual (English)

To Next Page

“GREAT SOUND FROM

YOUR FACTORY RADIO!”

TWO CHANNEL LINE OUTPUT

CONVERTER WITH ACCUBASS

FACTORY SYSTEM UPGRADE

“Maximum Processing with Minimal Eort”

AudioControl’s new Matrix DSP processors

When you require total control and optimization to

achieve great sound quality, AudioControl Digital

Signal Processors are the solution. The powerful

DM-810™ and DM-608™ DSP processors allow users to

truly optimize the performance of their audio system, regardless

of whether they are using a factory or aftermarket source, and

to truly achieve our goal “Making Good Sound Great”. These

highly versatile Digital Signal processors are equipped with

key features, such as active speaker-level inputs, line-level and

digital audio inputs, providing up to 10 channels of output.

AudioControl’s “smart user” interface contains the power

of AudioControl processing through a exible PC interface

packed full of features and simply laid out. Includes signal

summing, 30 bands of equalization, signal time-alignment, in-

put delay and phase correction, plus AudioControl proprietary features like

AccuBASS®, GTO™ Signal Sense, and MILC™ as well as integrated input and output RTA’s.

Need help?

Do you have a question about the AudioControl LC2i and is the answer not in the manual?

AudioControl LC2i Specifications

General

Maximum Speaker Level Input	400 watts per channel
Preamp Outputs	2
Output Level	9.5 Vrms
Frequency Response	10 Hz - 22 kHz
Input Impedance	20 kΩ
Output Impedance	150 Ω
Total Harmonic Distortion	0.01%
Signal to Noise Ratio	>110 dB
Recommended Fuse Rating	1 A
Input Channels	2
Output Channels	2
Bass Restoration	Yes
AccuBASS Processing	Yes
Type	2-channel line output converter
Power Supply	12V DC
Output Gain	Adjustable up to 9.5V