AudioEngine D1 User Manual

D1 setup guide
8
Troubleshooting
• I have connected my D1 as shown in the manual, but there is no
music output.
1. Check to see that the power light is lit. If not, try another USB
output on your computer.
2. Ensure that D1 is selected as your output device under Control
Panel (PC) or System Preferences/Audio (Mac).
3. Try another USB cable.
• I have connected my D1 to my TV/DVD/BluRay, but there is no sound
output.
1. Be sure that D1 is also connected to a USB power adapter, and
that the power light is lit.
2. Be sure that your TV/DVD/BluRay digital audio is set to “PCM
Stereo”.
• Only one channel plays through my D1.
1. Check the RCA cables between your D1 and your sound system.
2. Check your audio player to ensure that the balance is centered.
Break-In Period
Your DAC will sound great out of the box and will get better over time.
However, give it 40 to 50 hours break-in time before doing any critical
listening.

AudioEngine D1 Specifications

General

Digital audio coaxial in	-
Digital audio optical in	1
Operating voltage	5 V
Power consumption	200 mA
Product color	Black

Weight and Dimensions

Depth	88.8 mm
Width	101.6 mm
Height	25.4 mm
Weight	500 g