AudioEngine S8 Setup Guide

S8 setup guide
6
7
Controls
Your S8 Powered Subwoofer oers simple yet versatile setting
options. After you’ve become familiar with what these settings
do, don’t hesitate to experiment with them to nd the sound
that works best with your system.
When you set up your subwoofer for the rst time, you will prob-
ably make adjustments a few times before you hear what you
like. Start with the volume at 50% and keep in mind that as with
subwoofer room placement, there are really no right or wrong
settings.
Following is an overview of the subwoofer controls and connec-
tions:
*OQVUT
5IF3$"BOENNNJOJKBDLJOQVUTBSFMJOFMFWFMBVEJPJOQVUT
VTFEGPSDPOOFDUJOHUIFPVUQVUPGZPVSBVEJPTPVSDFSFDFJWFS
57J1PEDPNQVUFSFUDJOUPZPVS4TVCXPPGFS#PUIJOQVUTBSF
active so no switching is required if you wish to use inputs from
two dierent audio sources plugged in at the same time.
/PUF*GZPVSSFDFJWFSIBTBTJOHMFNPOPTVCXPPGFSPVUQVUDPO-
OFDUBO3$"DBCMFGSPNUIJTPVUQVUUPUIF3*()53$"JOQVUPO
the S8 rear panel.
-'&*O
*GZPVSQSFBNQMJöFSPSSFDFJWFSIBTBO-'&i-PX'SFRVFODZ&G-
GFDUTwJOQVUPSTJOHMF46#PVUQVUDPOOFDUJUUPUIJTi-'&*OwJOQVU
connector on the subwoofer.
/PUF.PTUSFDFJWFSTIBWFBTVCXPPGFSQSFBNQNPOPPSTUFSFP
PVUQVUTP-'&XJMMNPTUMJLFMZSFNBJOVODPOOFDUFE
0VUQVU
The Output connectors provide a full-range line-level output to

AudioEngine S8 Specifications

General

Subwoofer type	Active subwoofer
Subwoofer peak power	250 W
Subwoofer sensitivity	88 dB
Subwoofer frequency range	27 - 180 Hz
Subwoofer crossover frequencies	50 - 130 Hz
Line-out	Yes
Line inputs (RCA)	1
AC input voltage	110 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (standby)	8 W
Product color	White
Package weight	13600 g

Weight and Dimensions

Subwoofer width	280 mm
Subwoofer weight	12700 g