To Next PageTo Next Page
Need help?Do you have a question about the Audiovox AMP-772CS and is the answer not in the manual?
Crucial safety and operational guidelines to prevent damage and ensure correct use of the amplifier.
Details key technical parameters such as output power, frequency response, impedance, and operating voltage.
Check accessibility, surface solidity, wiring reach, and passenger/control interference for mounting.
Securely attach side brackets using provided screws to prevent short-circuiting internal components.
Connect the black wire to a grounded metal part and the orange/white stripe to a switched +12V source.
Connect the unit's input to the car stereo's speaker outputs, combining front/rear if applicable.
Connect speaker wires to the amplifier outputs, ensuring correct polarity and speaker power rating.
Press the power button to turn the amplifier on; the indicator lamp illuminates when active.
Adjust ten slide controls for bass, mid-range, and treble to customize audio tone reproduction.
The amplifier's volume is managed by the existing in-dash stereo system's volume control.
Adjusts volume balance between front and rear speakers when four speakers are connected.
General| Brand | Audiovox |
|---|---|
| Model | AMP-772CS |
| Category | Stereo Equalizer |
| Language | English |
