To Next PageTo Next Page
Need help?Do you have a question about the Audiovox AS-9055 and is the answer not in the manual?
General| Brand | Audiovox |
|---|---|
| Model | AS-9055 |
| Category | Remote Starter |
| Language | English |
Details two programmable RF transmitters for system operation, a core feature for remote control.
Highlights a three-channel receiver capable of accepting up to four transmitters, enabling multi-function control.
Lists multiple on-board relays for start, accessory, ignition 1, ignition 2, and parking lights, essential for system functionality.
Specifies that the Ignition 2 relay can be selected to be On or Off during cranking for flexible vehicle starting.
Notes an Ignition 3 / Shock By-Pass / GM VAT output, requiring a relay, for advanced integration options.
Mentions a tach signal learning circuit for accurate engine monitoring and control during remote start operations.
Includes two (+) and two (-) safety shutdown circuits to prevent unintended operation and ensure safety.
States the availability of an alarm by-pass output, facilitating integration with existing vehicle alarm systems.
Describes accessory outputs available before, during, and after start/crank/shutdown for added functionality.
Offers selectable steady or flashing parking lights for run indication, enhancing visual feedback.
Allows selection of run times at 5, 10, 15, or 20 minutes for the remote start function.
Instructs to press the transmitter button twice within 2 seconds to start the vehicle for a programmed run cycle.
Explains turning the ignition key to ON and stepping on the brake pedal to disengage the remote starter.
Lists conditions that stop the engine before the run cycle expires: transmitter button press, brake pedal, hood open, or safety switch off.
Describes the red handle switch for temporarily disabling remote start, recommended during vehicle servicing.
Clarifies that disabling the system keeps remote door locks and optional accessories operational.
Provides a chart for installer completion, detailing settings for run time, door lock timer, and light pulse/steady options.
