- 8 -
SLEEP OPERATION
The tuner, CD, tape and AUX can all be turned off
automatically.
1.Playback the desired sound source.
2.Press the SLEEP button, so that SLEEP is
displayed.
3.To change the sleep time:
Sleep initial will be 90 minutes.
Sleep selection (by press the SKIP / buttons)
will be 240, 210, 180, 150, 120, 90, 60, 30,
10, 5, 4, 3, 2.
The unit will turn off automatically after the preset
sleep time has elapsed.
Note:
Once the sleep time is set, it will remain the same
duration until the setting is changed.
To confirm the remaining sleep time:
Press the SLEEP button.
To cancel the sleep operation:
Press the SLEEP button repeatedly until SLEEP OFF
appears on the display window.
TIMER PLAYBACK
Before setting the timer, make sure that the clock
setting is correct.
1.In standby mode, hold the SHIFT (remote only)
and press the TIMER button repeatedly until clock
icon appears on the display. In standby mode.
2.Press the SET/PAUSE button.
3.Press the SKIP / buttons to adjust date for
timer playback.
MON, TUE, WED, THU, FRI, SAT, SUN or ALL
that on everyday.
4.Press the SET/PAUSE button.
5.Press the SKIP / buttons to adjust the
hour.
6. Press the SET/PAUSE button.
7. Press the SKIP / buttons to adjust the
minute.
8. Press the SET/PAUSE button.
9. Press the SKIP / buttons to select the
desired function of CD or TUNER.
10.Press the SET/PAUSE button.
11.Press the SKIP / buttons to adjust the
time for playback.
12.Press the SET/PAUSE button.
To cancel the timer playback operation
Hold the SHIFT (remote only) and press the TIMER
buttons repeatedly until TIMER OFF appears on
the display.
Note
You can set the timer playback in power on or
standby mode.
HOW TO SET THE TIMER
To Next Page
Loading...