1. Locate an appropriate spot on your
windshield.
Be sure there are no safety devices or other equipment
obstructed by the camera. Do
NOT locate
the camera in your
line of sight. We recommend behind the rear
view mirror.
2. Use an alcohol
pad
or
window
cleaner
and
clean
th~
glass completely.
3. Remove the protective covering from the tape on the mounting foot. Use caution to attach
correctly as the
tape is very strong and
will
not easily release. Place
the mount on the appropriate position on the
windshield
and press and
hold firmly
for
30
seconds to insure a good bond.
4.
Slide
in
the
DVR on the Mounting foot.
5. Adjust the
angle
of the
DVR
to be
level
with the ground and
looking
straight ahead.
6. Tighten the screw on the side of the bracket to
hold
the camera in
place.
Do NOT
over tighten or you could
r
damage the bracket.
To Next Page
Loading...